What is calendering?
Calendering is a mechanical finishing process in which fabric passes between rolls under pressure to create surface effects such as smoothness, lustre or embossing. The effect on fabric hand depends on its construction and the process settings. BCI lists calendering as one of its mechanical finishing services for woven fabrics.
Calendering uses pressure between a hard roll (usually metal) and a softer roll, which may be cotton-covered. It is a mechanical process, but resins or other finishing chemicals can be applied to add gloss or durability. The speed (dwell time in the nip), pressure and roll temperature are controlled to achieve the specified effect.
For buyers, calendering is one way to create a smooth face, a lustrous surface or an embossed pattern on woven fabric. Specify the desired result and confirm it against a finished sample.
What effects does calendering give?
- Smoother, flatter face — the yarns are flattened and the surface is evened out.
- Higher lustre — a flat surface reflects light evenly; friction and Schreiner calendering give the strongest sheen.
- Softer hand — some rolling calender processes can improve fabric hand; the result depends on the construction and roll settings.
- Flatter or more compact surface — some calendering effects can reduce air permeability or flexibility; confirm the result on the actual fabric.
- Pressed-in patterns — embossing and moiré create relief patterns or a watered effect.
The result depends on the roll surface (smooth, engraved, ribbed), the fibre, the pressure and the temperature.
What are the main types of calendering?
- Plain (rolling) calendering — can smooth or gloss a fabric surface and improve hand; the result depends on the fabric and settings.
- Friction (glazing) calendering — a faster, smoother roll polishes the fabric surface to a high gloss. The effect depends on the fabric and process conditions.
- Schreiner calendering — an engraved roll with fine angled lines changes surface texture and light reflection, creating a lustrous effect.
- Embossing — an engraved roll presses a pattern into the fabric. Heat can set the pattern on thermoplastic fibres; cellulosic fibres such as cotton generally need a resin finish for a durable effect.
- Moiré — creates a watered surface appearance; specify the desired effect with an approved reference sample.
Is the calendered look permanent?
Durability depends on the fibre, fabric construction, any finish chemistry and the process settings:
- Polyester and other thermoplastic fibres — heat can set some effects, but wash durability depends on the fibre and process; test the finished fabric.
- Cotton — surface effects may be less durable without a resin finish; test the specified effect after the agreed laundering procedure.
- Blends — results depend on fibre proportions and process settings; test the actual blend and state the required performance in the spec.
If appearance must last through domestic washing, specify the required appearance after an agreed number of wash cycles and confirm the test plan on the finished fabric.
How to specify calendering: lines you can copy
- Effect + side: "smooth calender, both sides" / "Schreiner lustre, face side" / "embossed pattern per attached sample"
- Durability: specify appearance after the agreed number of domestic wash cycles using an agreed ISO 6330 procedure, and set the assessment method and acceptance criteria.
- Reference sample: attach the approved calendered sample
- Measurements to agree: finished thickness (ISO 5084), plus the fastness tests relevant to the end use (e.g. rubbing fastness ISO 105-X12, wash fastness ISO 105-C06)
BCI's in-house lab runs a fixed set of tests, including rubbing fastness (ISO 105-X12) and wash fastness (ISO 105-C06); measurements such as thickness or softness are not in the in-house list — put the test in the spec and confirm with the BCI team which lab will run it.
BCI checks quality at three checkpoints: greige inspection before dyeing, in-process control and inspection at packing — and every lot leaves with a 10-point system quality report.
In real use: uniforms, linings, curtains
- Uniforms: TC and TR are both main uniform fabrics. If a smoother face is wanted, review a calendered sample and specify wash fastness ISO 105-C06 and rubbing fastness ISO 105-X12 where relevant to the end use.
- Linings and drapery: choose the target surface and lustre by reviewing a finished sample.
- Home textiles: specify the desired surface and hand on a reference sample.
- Combined with other finishes: confirm process compatibility and sequence with BCI, and list each required effect in the spec.
BCI dyes and finishes to your full spec — state the calender effect and the durability requirement on the spec sheet and send it to the BCI team to confirm it works on your base fabric and colour (MOQ is negotiable).
FAQ
How is calendering different from ironing a garment? Same physics — heat and pressure on the yarns — but calendering is a continuous, precisely controlled process (speed, pressure, temperature, damp cloth) applied to the whole fabric at the finishing stage. Ironing is a one-off garment-level treatment: it smooths, but it cannot create a controlled, repeatable lustre or pattern.
Does calendering change the fabric's colour or composition? No — the dye and the fibres are not changed. Because the flattened surface reflects light differently, the same shade can look slightly brighter or deeper; approve colour on the finished fabric, not the greige.
Which fabrics are usually calendered? Calendering is used on many woven fabrics, including cotton, blends and polyester. The result and wash durability depend on the fibre, construction and process settings.
Can calendering be combined with other finishes? It may be combined with other finishes when the process is compatible. List each required effect and confirm the sequence with the BCI team.
Does the fabric get thinner? Calendering can change thickness depending on the roll and settings. If thickness matters, specify and measure the finished fabric using ISO 5084; confirm any weight requirement separately.
How do I ask BCI for calendered fabric? Write the effect, side and durability requirement on your spec sheet, attach a reference sample if you have one, and send it to the BCI team to discuss your base fabric, colour and finish — MOQ is negotiable. Contact BCI.
Talk to BCI
BCI (Boonchuay Industrial) is a commission dyeing and finishing house with over 60 years of experience in Samphan, Nakhon Pathom. Calendering is part of the mechanical finishing line — calendering, sanforizing, air tumbling, raising, shearing, sanding (peach skin) and brushing — all available on fabric dyeing and finishing services.
See all finish options on the functional finishes hub, or contact the BCI team to discuss your spec and samples.

