What is a peach skin finish?
Peach skin (also called sueding, sanding or emerising) is a soft, matte surface made by lightly abrading a fabric face with a fine abrasive roller, creating a short surface fuzz. Raising, brushing and shearing are related mechanical finishes, but they handle surface fibres differently. Each gives a different result, and the outcome depends on the base fabric and process settings.
For buyers, hand feel is one consideration when selecting finished fabric, but the finish name alone is not enough: the spec should state the technique, the side to be finished, and the approved hand-reference sample. This article explains the four techniques and what to include in a clear specification.
Raising vs brushing vs sanding: what's the difference?
The four mechanical finishes differ in their tool and how they handle the fibre ends:
- Raising (napping): wire-covered rollers lift fibre ends from the yarn and create a visible nap. The raised surface can trap air and increase insulation, depending on the base fabric.
- Brushing: softer bristles, such as nylon, lift surface fibres; the effect is generally less pronounced than wire raising.
- Sanding / sueding / emerising: an abrasive-covered roller lightly abrades the surface and creates fine, short fuzz for a matte, suede-like face.
- Shearing: a blade trims raised nap to a more even height, often after raising.
In short, raising and brushing lift surface fibres, sanding abrades the face, and shearing trims raised nap. Approve the intended surface on a sample made from the actual base fabric.
Which fabrics suit soft-hand finishes?
The fibre and the construction decide the result:
- Fibre and yarn structure: accessible surface fibres may be easier to raise or brush, while high-twist yarns or very tight constructions can limit fibre release. Trial the actual base fabric before confirming a finish.
- Knits and wovens: either may suit some finishes. Suitability and machine settings depend on the specific construction, so review a trial sample.
- Warmth: raising the inside of some fabrics can trap air; confirm the intended hand and insulation effect on the finished sample.
- Smooth, matte appearance: sueding can create a fine matte surface. Check appearance and strength on the actual base before approval.
What does a soft-hand finish change? (the trade-offs)
Mechanical finishing is a trade, not a free upgrade:
- Hand and insulation: raising can trap air and increase insulation; the result depends on fabric construction.
- Shade and appearance: a surface finish may change apparent shade. Approve colour on the finished fabric.
- Weight: sanding abrades surface fibres, while other finishes affect fabric differently. State and verify the finished GSM after processing.
- Strength: abrasive sueding can reduce fabric strength. Agree the finish level and check the finished fabric against the required strength.
- Pilling: loose surface fibres may contribute to pilling; the result depends on the fabric, finish and use. Specify ISO 12945-1:2020 (Pilling box) or ISO 12945-2:2020 (Modified Martindale), with visual assessment under ISO 12945-4:2020 when required.
- Dimensional change: finishing can affect dimensions. Where needed, specify the washing and drying procedure in ISO 6330 and determine dimensional change under ISO 5077.
- Hand after laundering: if wash durability matters, agree the laundering procedure and number of cycles, then compare the finished fabric with the approved hand reference.
How to specify it: lines you can copy
- Finish and side: “peach skin, one side (face)” or “raised, both sides.”
- Hand reference: attach the approved sample and state “hand feel to match attached reference.”
- Test methods: specify the required pilling method; wash fastness ISO 105-C06; rubbing ISO 105-X12; and, where required, ISO 6330 washing/drying procedures with ISO 5077 dimensional-change determination.
- Finished weight: state and check the GSM after finishing.
- BCI lab scope: BCI’s in-house lab tests to ISO, JIS, AATCC and Daimaru. The company profile lists washing fastness, rubbing, dimensional stability and other fastness tests; pilling is not on the in-house list. Include the pilling method in the specification and confirm the testing arrangement with BCI.
BCI quality control has three checkpoints: greige inspection before dyeing, in-process control and inspection at packing. BCI issues a 10-point system quality report for every lot. Put the agreed finish, hand reference and acceptance criteria in the specification and confirm how they will be checked.
In real use: baby, fashion, uniform, home
- Baby / kids: BCI’s company profile lists cotton, bamboo and Tencel for these applications. Confirm the exact fabric and any certification required for the finished product with BCI.
- Fashion / casual: specify the desired surface and side, then approve a sample made from the intended base fabric.
- Uniform / workwear: TC and TR are both main uniform fabrics. Ask BCI to confirm the requested finish on the chosen base; specify wash fastness ISO 105-C06 and rubbing ISO 105-X12 when required by the end use.
- Home textile: the BCI profile lists polyester for home textiles without skin contact, and blends or natural fibres for items that contact people. Specify the intended finish and dimensional-change checks where needed.
BCI dyes and finishes to your full spec: state the finish on the spec sheet and send it to the BCI team to confirm it works on your base fabric and colour.
FAQ
How is peach skin different from brushed fabric? Peach skin or sueding is made by lightly abrading the fabric surface to create fine, short fuzz. Brushing uses bristles to lift surface fibres, while wire raising creates a more pronounced nap. Choose by the intended surface and approve a sample made from the actual base fabric.
Like other finishes that create surface fuzz, peach skin may affect pilling, but the result depends on the fabric, finish level and use. If pilling performance matters, specify ISO 12945-1:2020 (Pilling box) or ISO 12945-2:2020 (Modified Martindale), and visual assessment under ISO 12945-4:2020 when required. Pilling is not on BCI’s in-house test list; confirm the testing arrangement with the BCI team.
Sanding abrades surface fibres, but the finished weight depends on the base fabric and process. Specify the target finished GSM and verify it after finishing rather than inferring it from the greige fabric.
It may. A surface finish can change the apparent shade or texture. Approve colour on the finished fabric after the requested finish.
A TC or TR base may be considered, but suitability depends on the exact fabric and finish settings. Ask BCI to confirm and review a finished sample. Specify wash fastness ISO 105-C06 and rubbing ISO 105-X12 when required by the end use.
A soft hand alone does not confirm whether a finished fabric meets a baby-product requirement. BCI’s company profile lists cotton, bamboo and Tencel for baby and kidswear and OEKO-TEX Standard 100 certification. Confirm with BCI that the exact finished fabric and certificate meet the buyer’s requirements.
Talk to BCI
BCI runs the full mechanical finishing line: calendering, sanforizing, air tumbling, raising, shearing, sanding (peach skin) and brushing — all part of fabric dyeing and finishing services at Boonchuay Industrial.
See all finish options on the functional finishes hub, or contact the BCI team to discuss your spec and samples.

