Colorfastness is a fabric's ability to keep its colour under normal use — not fading, not bleeding, not staining other garments — whether it is washed, rubbed, exposed to sunlight, sweat or chemicals.

For brands and garment factories, colour fastness is a specification that must be stated in the fabric order, because a shade that bleeds in the first wash, or dark cloth staining white fabric, is a top driver of returns and end-customer complaints.

The problems you get when fastness is not specified

  • Bleeding in the first wash — common with dark shades and some dyestuff classes; it stains the white garments washed alongside and damages the brand's credibility immediately
  • Fading from light — display and outdoor fabric that is not specified for light fastness will not look the same to the customer after use as it did at ordering
  • Lot-to-lot variation — without a test as the reference for every lot, a new lot has nothing to compare against

Stating fastness levels in the spec up front is how buyer and mill share responsibility: the mill controls the process, and the buyer states the criteria the end customer accepts.

The fastness tests to specify

Under the ISO 105 family (Textiles — Tests for colour fastness), the core tests a buyer should specify are:

  • Wash fastness (ISO 105-C06) — the fabric is laundered to the standard; the colour change of the specimen and the staining of adjacent fabric are measured. Essential for all apparel
  • Crock (rub) fastness (ISO 105-X12) — the fabric is rubbed with white cloth, dry and wet; the colour transferred to the white cloth is rated. Critical for uniforms and workwear, because surface contact is constant wear
  • Light fastness (ISO 105-B02) — exposure to xenon-arc light that simulates daylight, rated against the blue wool scale. Critical for outdoor fabric, curtains, shop displays and garments dried in the sun
  • Perspiration fastness (ISO 105-E04) — tested with acidic and alkaline artificial perspiration. Important for garments worn close to the skin
  • Chlorine fastness (ISO 105-E01) — for fabric that contacts chlorine, such as pool and sports applications

How to read the results

Most fastness results are reported on the 1-5 grey scale (ISO 105-A02/A03): 5 is best and 1 is worst. (For wash fastness, colour change and staining are reported separately, e.g. 4-5/4.)

General practice:

  • General use: minimum 3-4
  • Garments worn close to the skin, or anything a brand stands behind: 4 or higher
  • If your end customer has its own standard: state that criterion in the spec directly

Light fastness is rated on the blue wool scale 1-8: the higher the number, the more light-resistant the fabric. Outdoor use: 4 or higher. (These figures are industry conventions; the end customer's requirement always takes precedence.)

How to write fastness into your fabric specification

  1. State the tests you need — wash / crock / light / perspiration / chlorine, based on the real use of the fabric
  2. State the minimum grade — e.g. wash 4-5, dry crock 4, wet crock 3-4
  3. State the reference conditions — the test condition of each method (for example ISO 105-C06 A2S or C2S, which set the wash temperature), wash temperature and light or dark wash where the end customer defines them, and for critical tests the lab or equipment. The same fabric can grade differently under a different condition or machine.
  4. Require the mill to test and issue a test report — before the bulk lot is released, using the same standard as your spec

A spec covering all four points minimizes quality disputes, because both sides measure against the same standard.

Colour fastness testing at Boonchuay Industrial

Boonchuay Industrial's in-house laboratory tests colour fastness in the factory: light, water, perspiration and wash fastness, chlorine fastness, rubbing (crock), plus dimensional stability and tear/tensile strength — to ISO, JIS, AATCC and Daimaru standards, covering both the domestic market and export (including JIS for Japanese customers).

Colour is also controlled from the lab dip onward, using a spectrophotometer and a multi-source light booth, so the production lot matches the sample the customer approved — the foundation of consistent fastness across a lot.

Frequently asked questions

Are all colours equally wash-fast

No — it depends on the fibre and the dyestuff class. Pigment dyes, which bond to the fabric surface, are generally less wash-fast than reactive dyes, which form chemical bonds with the fibre, and dark shades usually need tighter control than light shades. On cotton, vat dyes give the most durable colour of all, and vat dyeing is a Boonchuay Industrial speciality.

Will my dark fabric bleed onto white in the wash

It can, if the fabric fails wet crock or wash fastness — for dark shades, request dry/wet crock test results before accepting the lot.

Should I test fastness myself or rely on the mill's lab

A mill with a proper laboratory should test and issue a report. You may re-test samples independently at any accredited laboratory of your choice.

What fastness should I specify for uniforms

As a general rule: wash 4 or higher, dry crock 4 and perspiration 4 for close-fitting work — but always defer to the standard set by the end customer.

Specify fastness right from the first lot

See our uniform fabrics, controlled through full quality checking, or discuss testing specs and terms with our team on the contact page. If you have not gone through a lab dip yet, read our lab dip article first to understand shade approval.

References

  • ISO 105-C06:2010 — Textiles — Tests for colour fastness — Part C06 — International Organization for Standardization — iso.org
  • ISO 105-X12:2016 — Part X12: Colour fastness to rubbing — International Organization for Standardization — iso.org
  • ISO 105-B02:2014 — Part B02: Colour fastness to artificial light (xenon arc) — International Organization for Standardization — iso.org
  • Colour fastness according to ISO 105 series — Centexbel (textile research institute) — centexbel.be
  • AATCC — American Association of Textile Chemists and Colorists — aatcc.org