Outdoor and window-side fabric fades because the ultraviolet (UV) light in sunlight breaks the chemical structure of the dye molecule — a reaction no finish fully prevents. Light fastness is therefore a property of the fibre-plus-dye combination, not of the colour name. The standard practice: specify colour fastness to light in the spec with a named test method — ISO 105-B02 or AATCC 16 — and a minimum blue-wool grade that fits the exposure.

What is light fastness?

Light fastness (colour fastness to light) is the resistance of a fabric's colour to fading when exposed to light, measured by exposing a specimen to light under standard conditions and comparing its colour change with standard references.

  • Unlike wash and rubbing fastness, which use the grey scale 1–5, light fastness is graded on the blue-wool scale 1–8, a geometric progression — each grade is roughly twice as fast as the one below it (ISO 105-B02).
  • ISO 105-B02 also covers white (bleached or optically brightened) cloth, assessed by the change in whiteness against the blue-wool references.

Why does sunlight fade fabric?

  • UV is the main culprit — UV photons carry enough energy to break bonds in the chromophore, the part of the dye molecule that produces colour; visible light contributes less.
  • Fading is a chemical change — the dye molecule is destroyed, not moved onto another cloth as in "bleeding" — so a faded shade cannot be restored.
  • The rate depends on several factors — dye class, fibre, and the exposure conditions (intensity, humidity, temperature).
  • Photochromic dyes — some shades temporarily darken under light and recover in the dark, which is why ISO 105-B02 requires at least 24 hours of dark conditioning before assessment.

How is light fastness tested?

  • ISO 105-B02 — a xenon arc lamp giving a spectrum representative of natural daylight (D65): the specimen is exposed together with blue-wool references, set 1–8 (European) or L2–L9 (American) — the two sets are not interchangeable — and the colour change is graded against the closest reference.
  • AATCC 16 — the method for the US market (xenon-arc option, plus a carbon-arc option).
  • JIS / Daimaru — the Japanese standards used in trade with Japan.
  • ISO 105-B04 — artificial weathering: xenon arc combined with water, for cloth that faces real outdoor weather.

What does each blue-wool grade mean?

The 1–8 scale is geometric: grade 1 = very low (fades fast), grade 8 = very high, and each grade is roughly twice as fast as the one below — so the step from 4 to 5 is not the same as the step from 1 to 2.

Rules of thumb used in buying practice (market practice, not a standard requirement):

  • Interior / window-side use — 4 or better
  • Continuous outdoor exposure — 6 or better
  • Always tie the number to a named test method — a figure without a method cannot be compared across lots or across mills.

ISO 105-B02 vs ISO 105-B04 vs AATCC 16:

  • ISO 105-B02 — indoor daylight (window side, interior rooms): D65 spectrum, no water.
  • ISO 105-B04 — outdoor weathering: xenon arc plus water.
  • AATCC 16 — US customers: xenon arc.

Which colours and fibres fade slowest?

The main driver is the dye class:

  • Disperse dyes on polyester — high light fastness in general; this is why curtains, awnings and automotive fabric are mostly polyester.
  • Vat dyes on cotton — good to excellent (Cotton Inc. rates vat light fastness Good–Excellent).
  • Reactive dyes on cotton — varies dye by dye, some poor to fair; check the rating of the specific dye before outdoor use.
  • Direct dyes — low light fastness in general.

The same colour can fade at different speeds on different fibre-and-dye combinations — the colour name does not determine fastness, only testing the actual cloth does (more on fading vs bleeding in Why fabric colour fades or bleeds and in the buyer's guide Colour fastness for buyers).

How to specify light fastness in a fabric spec

  • Specify both parts: test method + minimum blue-wool grade, e.g. "ISO 105-B02, blue-wool 5 or better".
  • Ask for a light-fastness test on the lab dip before production, then check the actual grade on the report.
  • A report without a named standard is a floating number — it cannot be compared across lots or across mills.

Boonchuay Industrial (บุญช่วยอุตสาหกรรม) in Sam Phran, Nakhon Pathom is a commission dyeing and finishing company with over 60 years of experience in TC, TR, cotton and polyester work, with an in-house lab that runs the standard test set — light, water, rubbing, wash and chlorine fastness — to ISO, JIS, AATCC and Daimaru standards, under three checkpoints: greige inspection before dyeing, in-process control and inspection at packing, with a 10-point system quality report for every lot.

For cloth that lives in the light — curtains, upholstery, outdoor goods — add the light-fastness line to the spec: test method plus minimum blue-wool grade, and ask the mill which dye class the shade uses and what grade it holds. BCI dyes polyester with disperse dyes and cellulosic fibres with reactive and vat dyes, and specialises in vat dyeing for the most durable colour.

FAQ

How do I know which blue-wool grade my job needs?

Start from the exposure — window-side versus continuous outdoor — use the 4/6 rules of thumb above, tie the number to a named test method, and confirm with the mill that the specific shade holds that grade.

Can faded fabric be restored?

No — fading destroys the dye molecule. The only control is choosing a fastness grade that fits the exposure from the start.

Why do two pieces of "the same colour" fade at different rates?

Different fibre and dye combination — the colour name does not determine fastness, so testing the actual cloth is the only answer.

Is ISO 105-B02 enough for awnings and canopies?

ISO 105-B02 simulates indoor daylight (D65). For cloth exposed to real outdoor weather, ask for ISO 105-B04 (light plus water) as well.

Will BCI test light fastness for our colour?

Yes — the in-house lab runs colour fastness to light as part of the standard test set to ISO, JIS, AATCC and Daimaru. State the minimum grade you need and ask for the result on the report.

Talk to BCI

For fabric that lives in the sun — curtains, upholstery, outdoor goods — add the light-fastness line to your spec: test method plus minimum blue-wool grade. The BCI team dyes and finishes TC, TR, cotton and polyester to your spec.

References